

LVC-4000
Macro Sensors · LVDT Position Sensors (Heavy Industry)
Specifications
| Measure Range | (signal conditioner) |
|---|---|
| Signal Output | 4-20 mA; 0-10 VDC; RS-485 |
| Protection | NA |
| Electrical Connection | DIN Rail Terminals |
| Accuracy | ±0.1% FS |
Description
LVC-4000
The EAZY-CAL™ LVC-4000 is a standalone signal conditioner, supporting a wide range of AC LVDTs, RVDTs, and VR half-bridges, while providing several choices of voltage, current, and digital RS-485 outputs. Push-button calibration offers intuitive operation as compared to signal conditioners with span and offset trim pots. Fault conditions, such as a wire break on LVDT/RVDT connections, are indicated by blinking LEDs, fault condition error output, and Error Flag Open Collector signal (see manual for details). The LVC-4000 operates from a 9-30V DC power supply and is housed in a polyamide DIN rail- mounted enclosure. Calibration instructions, terminal functions, LVDT connection diagram and DIP switch functions are printed on the side
Synchronization to other signal conditioners is accomplished by a daisy chain connection to a synchronization bus. One unit will assume the Master function based on DIP switch priority setting. If a fault should occur, the next highest priority unit will take over as Master. With the use of the RS-485 port, a host computer is able to retrieve measurement data, receive operational status, perform remote calibration, and perform hot swap reconfiguration.







