

HSTA-HSTAR
Macro Sensors · LVDT Position Sensors (Heavy Industry)
Specifications
| Measure Range | ±0.05~±10 inch |
|---|---|
| Signal Output | AC LVDT |
| Protection | IP68 |
| Electrical Connection | Radial Connector (MIL-DTL-38999) |
| Accuracy | ±0.25% FS |
| Housing Material | All-welded stainless steel |
Description
HSTA-HSTAR
Macro Sensors’ HSTA and HSTAR 750 Series of 3/4 inch (19 mm) diameter AC-operated LVDTs are designed for a wide range of position measurement applications. These are rugged hermetically sealed sensors, constructed entirely of stainless steel, and intended for use at high temperatures (400°F). The coil windings are sealed against hostile environments to IEC standard IP-68 and electrical termination is through a sealed axial (HSTA) or radial (HSTAR) connector. The radial connector offers two important benefits. First, it results in a through-bore design, which permits access to either or both ends of the LVDT’s core for better mechanical support and core guidance, and easier cleanout in dusty or dirty locations. The second advantage of the radial connector is shorter installed length compared to units of the same range with axial connectors. The mating connector plug is supplied with the unit.
Available in ranges of ±0.050 inch (±1.25 mm) to ±10.0 inches (±250 mm), HSTA/HSTAR 750 Series sensors feature the high resolution, excellent repeatability, and low hysteresis associated with LVDT technology, as well as the highest sensitivity consistent with good linearity. The maximum linearity error for any of these sensors is ±0.25% of full range output using a statistically bestfit straight line derived by the least squares method.
Macro Sensors offers several standard options that permit a user to customize HSTA/HSTAR 750 LVDTs, including Teflon® bore liners and metric threaded cores, as well as smaller diameter and low mass cores. In addition, Macro Sensors can provide a range of mounting accessories and core extension rods. On special order, the HSTA/HSTAR 750 Series can be constructed for resistance to mild nuclear radiation (3x107 Rads), as well as for immersion in pressurized fluids and to withstand higher operating temperatures.
All HSTA/HSTAR 750 Series LVDTs will operate properly with any conventional differential input LVDT signal conditioners, but operation with ratiometric LVDT signal conditioning is not recommended. Macro Sensors offers a full line of LVDT signal conditioners that will deliver optimum performance from any HSTA/HSTAR 750 Series LVDT.







