

HPGS750
Macro Sensors · LVDT Position Sensors (Heavy Industry)
Specifications
| Measure Range | ±0.05~±10 inch |
|---|---|
| Signal Output | AC LVDT |
| Protection | IP68 |
| Electrical Connection | Radial Connector (MIL-DTL-38999) |
| Accuracy | ±0.25% FS |
| Housing Material | All-welded stainless steel |
Description
HPGS750
Macro Sensors’ HPGS 750 Series of 3/4 inch (19 mm) diameter ACoperated LVDTs is designed for a wide range of position measurement applications. These are rugged hermetically sealed sensors, constructed entirely of stainless steel, and intended for use at high temperatures (400°F). The coil windings are IP-68 sealed against hostile environments and electrical termination is through a sealed radial screw on style 38999 connector (mating connector included).
The screw on radial connector offers three important benefits. First, it results in a through-bore design, which permits access to either or both ends of the LVDT’s core for better mechanical support and core guidance, and easier cleanout in dusty or dirty locations. The second advantage of the radial connector is shorter installed length compared to units of the same range with axial connectors. Third, units withstand higher vibration.
Macro Sensors offers several standard options, including *Teflon® bore liners and metric threaded cores. In addition, Macro Sensors can provide a range of mounting accessories and core extension rods. HPGS LVDT’s series can also be supplied to withstand exposure to mild radiation (3x107 Rads). On special order, the HPGS 750 Series can also be constructed for immersion in pressurized fluids.
All HPGS 750 Series LVDTs will operate properly with any conventional differential input LVDT signal conditioner. Macro Sensors offers a full line of LVDT signal conditioners that will deliver optimum performance from any HPGS 750 Series LVDT.







